Reliable Rubber Products manufactures heavy duty laminate dock bumpers in a variety of horizontal and vertical models and sizes to provide maximum protection against vehicle damage to loading docks, dock levelers, buildings and cargo. Reliable Rubber Products dock bumpers are manufactured with 1/4" structural steel angles at each end; a 3/8" flat plate may be substituted for one or both angles, for use with dock levelers. Extra length and extra thick laminated bumpers to provide protection for unlimited applications.
Furnish and install laminated rubber dock bumpers as manufactured
by Reliable Rubber. Laminated Pads shall be rubberized-fabric
truck tires cut to uniform size and punched to receive 3/4" support rods.
All bumpers must be a minimum of 4 1/2" thick and closed
with two 1/4" structural steel
angles under approximately 2000 lbs of pressure. Rods shall
be welded to angles at one end and closed with a nut at
other end. Anchor leg of angles shall extend a minimum of
2 1/2" beyond rubber surface at either end and contain
13/16" anchor holes as required. Anchor bolts
are supplied separately. Finish of exposed metal shall be
black lead free enamel or galvanized (hot dipped).